Wahoo V-1.0.6:

Force Wahoo hardware to fresh reset when lose GPS fix for more than 1 hour. During operation
as soon the hardware regains GPS fix, the timer is reset. There are a couple of units in the
field have no reporting because of no GPS lock.

Wahoo V-1.0.7W2:
Release date: 04/25/2008
Fixed version for Wahoo 2 hardware:
1. re-map pin 1, 2, and 3 to work with Wahoo 2.
2. added ADC1_IN voltage meter reading. When W2 hardware voltage drops down to under 1.5V the
   hardware shutdown and reset according to Indesign advice. That way no false sensors trigger
   report.
For MFG, the following output from console need to be verified,
ADC meter=2022 mV (Normal operation the voltage should be at least 2000mV or 2V)
UNDER VOLTAGE - shutting down!!! (after shut down the power supply)

Wahoo V-1.0.8W2:
Release date: 04/28/2008
Fixed bug when very first time MFG was trying to load 1.0.7W2, IllegalStateException was thrown.
This happens only when no hardware id in the memory.

Wahoo V-1.0.9w2:
Release date: 06/06/2008

Add an iButton temperature thread to handle temperature probe.

Wahoo V-1.1.14T:
Release date: 09/30/2008

moved code to V-1.1.14 based.
1. 7-byte power cut packet to replace 21-byte.
2. Added keep alive per 2 min when ignition is on and stop. Under conditions of no gps or 
   ignition off, it changes to night mode that does not send keep alive for the first 2 hours.
   After that, it sends keep alive per 30 min.

Wahoo V-2.0.0T:
Release date: 12/09/2008

moved to 2.0.0 code base.